Xerox · Monochrome Multifunction

Xerox 6050

Mono wide format CAD plotter for AEC and repro shops — 9 D/A1 ppm at 600 x 1200 dpi, 36-inch max width, 4 roll drawers, optional concurrent scan, FreeFlow Accxes workflow, 208V install.

0 · 0 verified reviews · Read reviews
Print speed
9 ppm mono
Paper capacity
sheets
Duplex
Automatic Duplex
Connectivity
Ethernet
Free delivery 24-hr quote turnaround Authorized Xerox reseller Lease or buy outright
In stock
Xerox Xerox 6050 Wide Format Solution
Authorized Xerox reseller Free shipping to 50 states 1-year manufacturer warranty Install guidance by phone 30-day return policy
Is this the right printer for you?

Who the Xerox 6050 is actually for

Most printer pages just tell you what a printer does. Here's the honest version: when this machine is the right choice, when it's fine, and when you should look at something else. We sell a lot of these for a reason, but the reason is not "every office."

Best fit

Pick this if...

  • You run an architecture, engineering, or construction document shop doing 1,000-3,500 D-size plots per month.
  • You need 4 roll drawers — bond, vellum, film, plus a backup — loaded simultaneously for non-stop work.
  • You print mono CAD up to 36 inches wide and want 600 x 1200 dpi for tighter line work than the 6030 or 510 deliver.
  • You want optional concurrent scan-while-print so red-line capture doesn't block the queue.
  • You're standardized on FreeFlow Accxes across multiple wide format units.
Works fine

You'll be happy if...

  • You print 3,500-5,000 D-size plots per month — engine handles it but you'll order toner and rolls steadily; consider 6204/6279 if heading higher.
  • You're considering the 6050A variant — same platform with later firmware; supported via the same Accxes workflow.
  • You added the optional Multi-Sheet Inserter for non-roll media — works, but workflow planning matters.
Look elsewhere

Skip this if...

  • You need color wide format — mono only.
  • You print under 500 D-size plots per month — overkill; the 510 (3 rolls, 115V) fits better.
  • You need higher resolution for raster work — the 6622 at 600 x 1800 dpi is the upgrade.
  • You don't have 208V / 12A and a 683-lb floor capacity in a print-room footprint.
  • You need new-with-warranty gear — end-of-life; supported via refurb and parts channels.
Full specifications

Every spec, no guessing

The Xerox 6050 Wide Format Solution is a mono wide format CAD/AEC plotter built for architecture, engineering, and construction document shops doing 1,000-3,500 D-size plots per month. It prints up to 9 D/A1 prints per minute at 600 x 1200 dpi with a 23-second first plot out on roll media up to 36 inches wide. Standard configuration includes 4 roll drawers — operators keep bond, vellum, film, and a backup roll loaded for non-stop work, which is the main reason shops pick the 6050 over the 6030 (2 rolls). The optional integrated wide format scanner scans concurrently with printing at 600 x 600 dpi for scan-to-print and scan-to-network workflows; the optional Multi-Sheet Inserter handles non-roll media. Footprint is 37 x 49.2 x 25.2 inches at 683 lb on 208V / 12A. Maximum monthly volume tops out around 17,500 sq ft; toner yields about 23,500 sq ft per cartridge. Workflow runs on FreeFlow Accxes Print Server (TCP/IP, AutoCAD / HPGL / HPGL2 / CALS drivers). Color touchscreen interface for walk-up. The 6050A variant is the later firmware version supported on the same Accxes platform. Buyer regret: spec'ing the 6050 when AMPV is closer to 5,000 plots/mo — at that volume the 6204 (and especially the 6279) is the better starting point. Best for AEC shops at solid mid-volume that need 4 rolls in a tight footprint.
Print
Print technology Multifunction
Print speed (mono) Up to 9 pages per minute
Print speed (color) Up to pages per minute
Duplex printing Automatic Duplex
First page out < 30.5 sec
Copy & Scan
Capability Monochrome Multifunction
Duplex copy / scan Automatic Duplex
Scanner type Integrated on-board scanner
Scan destinations
Paper
Paper capacity 0 sheets
Paper size
Recommended monthly volume 17500 pages
Max monthly duty cycle 175000 Copies
Connectivity
Wired Gigabit Ethernet (10/100/1000)
Physical & power
Form factor Wide-format
Usage class Small Office
Manufacturer Xerox
Model Xerox 6050 Wide Format Solution
How you can buy this printer

Buy it, lease it, or just reorder supplies

Three ways to get this printer, each priced to match how you actually use it. Most small offices lease because toner and maintenance are bundled. If you know what you need, buy outright. If you already own one, just reorder supplies.

Buy outright
One-time payment · yours to keep
Custom quote
Free delivery · 1-yr warranty
  • Machine is yours the day it arrives
  • 4,500-page starter toner included
  • 1-year Xerox manufacturer warranty
  • Install help by phone or remote session
  • Order your own toner when the starter runs out
Request purchase quote →
Supplies only
Already own one? Just reorder.
Request pricing
Genuine Brother TN830 / TN830XL
  • Genuine Brother TN830 toner (standard yield, ~1,200 pages)
  • Genuine Brother TN830XL toner (high yield, ~4,500 pages)
  • Genuine Brother DR810 drum unit when it's time
  • Free shipping on qualifying orders
  • Auto-reorder option so you never run out mid-job
Order supplies →

Final lease rate depends on term length, credit profile, and bundled supplies. Outright purchase and supplies pricing varies with bundled warranty, install packages, and order volume. Request a quote for exact pricing.

Included with every order

What ships with the Xerox 6050

The printer itself

Xerox 6050 in original Xerox packaging. Wide-format form factor, roughly 49.2 W x 25.2 D x 37 H (printer only)

Starter toner

Includes a high-capacity starter supply, giving you about 3 to 6 months of use before you have to think about your next order.

Setup documentation

Xerox quick-start card, power cord, USB cable (use Wi-Fi or Ethernet for multi-user), and a link to driver downloads.

Setup call (if you want it)

Book a 20-minute setup call with our team. We'll walk through network config, driver install, and first print. No extra cost, no sales pitch.

Supplies & consumables

Toner, yields, and what to actually reorder

The #1 question we get on this printer is "which toner do I buy?" Short answer: you have two cartridge options and a drum. Standard yield TN830 covers roughly 1,200 pages. High yield TN830XL covers roughly 4,500 pages and is the better value for most offices. Pick XL unless you print very little.

The drum unit (DR810) is separate and usually lasts 15,000 to 30,000 pages before it needs replacing. At a typical small office volume, expect to change it once every 2 to 4 years.

If you lease this printer through us, toner and drum are included. You never pay for supplies separately. That's usually the better deal once you add up real costs over 3 years.

TN830

Standard-yield toner

About 1,200 pages · fits all L2700 / L2750 / L2759 series

Quote
each
TN830XL

High-yield toner BEST VALUE

About 4,500 pages · recommended for most offices

Quote
each
DR810

Drum unit

15,000–30,000 pages · replace every 2–4 years · separate from toner

Quote
each
Request bulk supplies pricing →
0.0
★★★★★
Based on 0 verified customer reviews

Verified means the customer bought this exact model from us. We don't publish paid or incentivized reviews.

What customers actually say

The 5-star consensus: "it just works"

Small sample size, high signal. The 0 verified reviewers picked this model to replace older inkjets or aging Xerox machines. Common threads in the feedback:

Five reviews is a small sample. Want to see hundreds of reviews across our whole catalog? We have a 5.0 average on Google across 1,240+ reviews and an A+ BBB rating. Linked below.

Better Business Bureau
A+ BBB rated
Accredited business
★★★★★
5.0 on Google
1,240+ reviews
G2 verified vendor
G2 verified
Vendor profile
Free quote · no obligation

Get a quote on the Xerox 6050

Tell us how you want to pay (outright, lease, or supplies only) and what volume you run. You'll get a line-item quote back within one business day, from a specialist who actually works on these machines, not a general sales rep.

  • Real pricing, no runaround. Upfront monthly lease rate or outright price, plus shipping and any install add-ons itemized.
  • One business day turnaround. Quotes land in your inbox within 24 hours. Often faster.
  • No credit pull until you say yes. We don't ping your credit to give you a quote. Only if you sign.
  • Volume & bundled supplies. Tell us your monthly print volume and we'll price toner bundling so you don't get surprised.
FAQ

Xerox 6050, common questions

The questions we get asked most often on this model. If yours isn't here, call (616) 800-7682 and get an answer in about 30 seconds.

Yes, the Xerox 6050 ships with a starter toner cartridge. The starter toner yields approximately 23,000 to 23,500 square feet. The replacement toner model is 006R01185 (or 6R1185), which is a high-yield black toner cartridge. When you lease through us with toner included, you never pay for toner separately.
The Xerox 6050 is designed for mid-volume AEC shops, printing up to 9 D/A1 plots per minute at 600 x 1200 dpi, while the Xerox 510 is suited for smaller offices with a print speed of 10 D/A1 plots per minute at 400 x 400 dpi. The 6050 includes 4 roll drawers and requires 208V power, whereas the 510 has 3 roll drawers and runs on 115V. The 6050 also supports higher resolution and a larger maximum monthly volume. For small offices with lower volume needs, the Xerox 510 is a more cost-effective choice.
The Xerox 6050 is ideal for small to mid-sized AEC firms with a monthly volume of 1,000-3,500 D-size plots. It offers a print speed of 9 D/A1 plots per minute and supports up to 4 roll drawers, making it efficient for continuous workflows. However, if your business requires higher volume or color printing, consider stepping up to a commercial option like the Xerox 6204 or 6279.
No, the Xerox 6050 is a monochrome printer designed for black-and-white wide format printing. For color printing needs, consider alternatives like the Xerox 6622, which supports color and higher resolution.
Request a quote through the form on this page or call us at (616) 800-7682. A printer specialist responds within one business day with a detailed, itemized quote based on your location, monthly volume, whether you want to buy outright or lease, and any bundled supplies or service. Quotes are free and no obligation. We do not pull credit to issue a quote.
Xerox includes a 1-year limited manufacturer warranty on the Xerox 6050 when purchased new from an authorized reseller. Kraft Business Systems is an authorized Xerox reseller. Extended warranty and full-service maintenance plans are available through our managed print services bundle, which covers parts, labor, and on-site service for the life of the agreement.
Yes. Free delivery is included on every Xerox 6050 order shipped within the continental United States. Most orders ship within 1 to 2 business days and arrive within 2 to 5 business days. Install guidance is available by phone or remote session at no extra cost.

Ready to put this printer to work?

Request a free, no-obligation quote on the Xerox 6050. Lease, buy outright, or just order supplies. Quote in your inbox within one business day. Or call and talk to a specialist right now.